91pornÊÓƵ

Series ITV electro-pneumatic and electronic vacuum regulators control air/vacuum pressure steplessly in proportion to an electric signal. They are light weight in design with a bright and easy to read LED display. The monitor output is available either as analog output or switch output. The ITV series is IP65 equivalent.

Series ITVX2000 high pressure electro-pneumatic regulator provides stepless control of air pressure to an electrical signal. They have an easy to read digital pressure display and a power consumption of 3 W or less. The new series has a 5.0 MPa maximum supply pressure.

The VX2 series is 2 port direct solenoid valve for general purpose air, medium vacuum and water. Available body materials include resin, aluminum, brass or stainless steel with port size up to 1/2 inch. Resin body is offered with one touch fitting to reduce installation time. It is also available as a manifold to reduce piping.

JSX series is a 2-port direct operated solenoid valve for air, water, steam, vacuum and oil. It has standard stainless-steel enclosure to have superior resistance to both corrosion and water. JSX series utilizes new coil technology to maximize magnetic efficiency and reduced energy consumption. Internal stopper is utilized to reduce metal noise and longer service life.

ISE20B-L is a digital pressure sensor supporting the IO-Link communication protocol.  When paired with an IO-Link master, measured values, and settings can be accessed from the HMI screen of a PLC.  ISE20B-L incorporates IO-Link version 1.1 and COM2 speed. 16-bit process data include 2 output bits for set points, a diagnosis bit and 13 bits for the measured value. The 3-screen, 3-color display shows the instantaneous reading in red or green, and the setting label and its numerical value in orange.  ISE20B-L is UL/CSA, CE and RoHS compliant, with an IP65 enclosure rating.

PSE300A is a sensor monitor with an informative, easy to read 3 screen, 3 color display.  Connect any PSE series remote pressure sensor to acquire its analog input.  Alternately, the range input function can scale any 1-5V or 4-20mA signal from another sensor type to a display value from -1500 to 1500.  View the sensor's measured value on the main screen, while also viewing a variety of secondary data on the sub-screens, including switch set point value, level meter, character string for labeling and more.  A copy function allows master settings to be applied to up to 10 target sensors.  Additional functions include selectable NPN/PNP outputs, anti-chatter, error codes, power saving, key lock, security code and others.  PSE300A is CE, C-RU-US and RoHS compliant, with an IP40 enclosure rating.

Series PF3A digital flow switch provides continuous quantitative values as well as switched digital outputs when set flow levels are measured. The PF3A is suitable for applications requiring a metered quantity of air, such as for supply confirmation, filling accumulation, or fixed supply consumption. The oversized PF3A display has 2 screens, with main screen flow values in red or green, while the sub screen settings are shown in orange. The display can be rotated in 90 degree increments, thereby offering better visibility during operation. The thermal sensor is protected in a bypass flow path to reduce contact with moisture and contaminants, avoiding accuracy deterioration and damage.  The PF3A has an IP65 ingress protection rating and is both RoHS and CE compliant.

HRS compact recirculating chillers are designed to meet the widest range of single-point applications in both industrial and technology settings. The package design is robust enough for the factory, yet ergonomic and compact for lab installations. Coolant can be either heated or cooled within the set temperature range. Choose from six cooling capacities, air or water cooled refrigerant, and global power supply options. This model is compatible with 100 VAC power.

The HRR is a temperature control device mountable in a 19-inch rack.  Rack mounting recovers desktop or floor space, permitting stacking of related devices and mobility, depending on the rack style.  Recirculating fluid removes heat from the process source, which is then removed from the fluid by an air cooled refrigeration circuit.  Air cooling frees the installation from dependence on facility cooling water.  Coolant temperature stability is ±0.1°C within a set temperature range of 5 to 35°C.  This device is self-contained with coolant and refrigerant circuits, fan cooled heat exchanger, electronic controls, pump, tank and power supply.

The HRLE is a temperature control device featuring two independent cooling channels in one package.  This thermo chiller is designed to cool the optical head and oscillator of a laser processing system.  Considerabe space savings can be realized compared to a two chiller solution.  All operation can be managed from a single touch panel.  Compared to the HRL, the HRLE targets medium-sized 3-4kW lasers and simplifies the internal components.  Heat extracted by the refrigerant cycle can be either cooled with a fan (air type) or with facility water (water type).  Space and energy are saved using a single fan (air type), compressor, pump and tank.  The heating function uses waste heat from the refrigerant discharge instead of a separate electric heater to improve efficiency and reliability.  Several features are optional to reduce the cost of the basic unit.  These options include DI water capability, electrical conductivity control kit, bypass piping, automatic water fill kit, particle and fluid fill filters, and a ball valve set for adjusting coolant pressure and flow rate.

The HRL is a temperature control device featuring two independent cooling channels in one package.  This thermo chiller is designed to cool the optical head and oscillator of a laser processing system.  Considerable space savings can be realized compared to a two chiller solution.  All operations can be managed from a single touch panel.  A triple inverter controls power consumption of the fan, pump, and compressor for optimal energy savings.  The heating function uses waste heat from the refrigerant discharge instead of a separate electric heater to improve efficiency and reliability.  The HRL is copper free and suitable for DI water, including a DI filter and electrical conductivity control kit.  Additional standard features include a 5µm particle filter, earth leakage breaker, and casters for mobility.

PF3W is a digital flow sensor that constantly monitors water or coolant flow.  PF3W refreshes the design and operating performance of the legacy PF2W model.  The body is up to 40% smaller in volume, and requires shorter straight piping for improved installation flexibility.  The upgraded 2-screen, 3-color numerical display rotates in both CW and CCW directions, offering improved visibility in a range of orientations.  Two outputs are available, including two switch signals, or a switch and analog signal.  Options include a mounting bracket, flow adjustment valve and temperature sensor to monitor flow and temperature simultaneously.  PF3W is grease-free, IP65 rated, and C-UL-US, CE and RoHS compliant.

FC3W is a flow controller for water between 0-50°C. A motor driven adjustable flow valve works together with feedback from a Karman vortex flow sensor to establish a flow rate corresponding to an analog input signal. When a single water supply source is divided into multiple lines, the flow rate between lines can be inconsistent. FC3W controllers can adjust flow on each line to a constant rate. Power, control, and error status LEDs confirm operation. The device is also grease free and IP65 rated. Please be aware that FC3W does not include a flow shutoff feature. Pair the controller with a VXZ 2-port solenoid valve to stop flow for any reason. Meets CE, UKCA and RoHS certifications.

Series SGC coolant valve, with both CE and RoHS accreditation, provides the perfect solution for high speed machining. Due to the SGC’s unique scraper, squeeze seal, grease channel and dry bearing construction, the valve’s service life will exceed 5 million cycles. The introduction of a built-in magnet allows auto switches to be fitted, enabling confirmation of whether the valve is open or closed.

SGH 2 port high pressure coolant external pilot solenoid valve for high pressure coolant liquid (up to 3.0 MPa/7.0 MPa). Ideal for lubrication, dust blowing and cooling. Flow rate ranges from Cv of 1.8 to 6.5

CH2 double acting hydraulic cylinders conform to JIS B 8367 specifications.  Surge pressure generated when running into the cushion has been reduced by 30% or more compared to the CH series, due to the CH2's cushion seal system.  Separate construction of the rod cover simplifies maintenance.  Available in bore sizes 32mm to 100mm.  All series types are available with auto switch capability with the exception of the steel tube type.

91pornÊÓƵ has improved product performance and reliability with the redesigned SY series valve.  The SY3000 and SY5000 have the same valve width as their predecessors, but the flow has been increased by up to 80%, allowing the valve size to be reduced. A built-in strainer in the pilot valve prevents trouble caused by foreign matter. By using H-NBR seal material for the main valve and seals, Ozone resistance has been improved.   Side, top and bottom port/pipe directions are available to allow flexible installation.  The SY is available in body ported or base mounted styles, and can be used individually or manifold mounted.

91pornÊÓƵ has improved product performance and reliability with the redesigned SY series valve.  The SY3000 and SY5000 have the same valve width as their predecessors, but the flow has been increased by up to 80%, allowing the valve size to be reduced. A built-in strainer in the pilot valve prevents trouble caused by foreign matter. By using H-NBR seal material for the main valve and seals, Ozone resistance has been improved.   Side, top and bottom port/pipe directions are available to allow flexible installation.  The SY is available in body ported or base mounted styles, and can be used individually or manifold mounted.

91pornÊÓƵ's VP300/500/700 series solenoid valve, offers high flow capacity and reduced power consumption (1.55W standard, 0.55W with power saving circuit).  The VP series may be used as either a selector valve, or a divider valve.  It is available in a normally closed or a normally open style. The series is vacuum applicable up to –101.2kPa.

JSX series is a 2-port direct operated solenoid valve for air, water, steam, vacuum and oil. It has standard stainless-steel enclosure to have superior resistance to both corrosion and water. JSX series utilizes new coil technology to maximize magnetic efficiency and reduced energy consumption. Internal stopper is utilized to reduce metal noise and longer service life.

The VX2 series is 2 port direct solenoid valve for general purpose air, medium vacuum and water. Available body materials include resin, aluminum, brass or stainless steel with port size up to 1/2 inch. Resin body is offered with one touch fitting to reduce installation time. It is also available as a manifold to reduce piping.

The AF-D series of modular air filters brings a modern appearance to 91pornÊÓƵ's line of filters while maintaining the high performance of our other series.  These 5 μm units can serve as appropriate filtration for many applications or as a pre-filter for fine filtration/coalescing units.  The transparent bowl guard on the size 30 and larger provides improved environmental protection as well as full view of the bowl contents.

The AR-D series of modular air regulators brings a modern appearance to 91pornÊÓƵ's line of regulators while maintaining the high performance of our other series.  Its 125 psi maximum set pressure and range of standard features make it ideal for most applications.  The new handle design make these units easier to adjust than previous models.  The AR-D is currently available in three body sizes with more to come in the near future.

For applications requiring micro-mist separation up to .01µm with adjustable pressure regulation, the AWD offers these features built into one unit. This combination of products saves space and mounting hardware. Available with ports from 1/8 to 1/2 with NPT, Rc and G (PF) threads as standard. The many options available such as auto-drain, gauge, variety of bowl choices and regulation set pressures make this series easy to configure to your application.

The AM*-D mist separators are designed for modular connectability and to match the aesthetics of the AC-D series of FRL components.  Flow capabilities are improved beyond the legacy AM series for extended applicability.  These coalescing filters are nominally rated at 0.1 micron for an initial stage of oil removal after a particulate filter.

The VHS series provides a convenient means of isolating supplied pressure in a pneumatic system and exhausting downstream pressure for maintenance purposes.  The units can be locked in the exhaust position and can be an integral part of an energy isolation system.  Air flow direction is easily identified by handle orientation and labelling.  

The ZP, ZP2 and ZP3 series lateral entry adapters offer a wide variety of cup diameters, materials and designs to suit multiple applications.  The adapters are available with 91pornÊÓƵ's acclaimed built-in one-touch fittings. Buffer types are available with strokes up to 50mm, depending on the series.  

The ZK2*A series is an energy-saving generator with 93% reduced air consumption.  It has a 50% increase in suction flow compared to other single stage 91pornÊÓƵ generators.  The ZK2*A also has various mounting options to choose from.