91pornÊÓƵ

Solenoid valve is designed for special applications like air, gas, steam, water and oil.  The VXK includes a Y type strainer installed inside the body to remove foreign materials mixed in fluids  before they enter the actuating part of the valve (armature), as well as preventing the flow of foreign materials to downstream equipment.  The VXH is high pressure capable of a maximum operating pressure is 2.0  MPa.

Customers looking for a compact, light-weight, high flow valve for piloting process valves or actuator applications, need search no longer.  91pornÊÓƵ's series V100 is one of the most advanced solenoid valves in today’s market.  The standard V100 uses only 0.35w, which is 76% less than comparable valves.  The low power model uses only 0.1w, reflecting dramatic savings of up to 93% compared to existing products.  Weighing in at a mere 12g, with flow rates between 8.4 and 24 l/minute, it’s the perfect solution when space, performance, and component weight is critical.

SX90 and SX090 are low profile 2/3 Port Direct Operated Poppet Style Solenoid Valves for Air and Inert Gases.  The 2 port SX90 can provide large flow rate of 45 L/min from its compact body.  The 3 port SX090 can provide large flow rate of 90 L/min from its compact body.  Example applications for SX90 and SX090 are blood pressure measuring device, portable oxygen concentrator, chip mounter, air blow and sorting.

PVQ series, compact proportional solenoid valve, was designed by 91pornÊÓƵ with a direct poppet construction.  This construction enables low leakage, while de-energized.  PVQ series has been used in applications such as air blow, flow control, hand piece control for dental unit and other respiratory equipment, as well as, cooling for laser machinery etc.

SFDA series is a stainless steel inline filter with hollow fiber element to remove bacteria from compressed air that passes through it.  SFDA series uses materials compliant with FDA and Japan's food sanitation law for its wetted path.  SFDA filter is suitable for direct air blowing to food products.

When straining and regulation of small water lines is required, 91pornÊÓƵ's water regulator and strainer can be used to prepare your lines.

Series M and MS miniature fittings are for use with air connections in confined areas. The hose nipple and hose elbow styles accept nylon, soft nylon and polyurethane tubing. The body of the MS series is stainless steel, making it possible to use this fitting in corrosive applications.

Series KQG2 is a one-touch fitting made of all stainless steel SUS316, except seal parts. The series is suitable for use with steam and is grease-free. Applicable tubing includes FEP, PFA, nylon, soft nylon, polyurethane and polyolefin. The KQG2 series is available in both metric and inch sizes. The KQG2 is more compact and lightweight, and offers more configuration variations and tube sizes than the KQG series.

Compact and lightweight, the KQB2 one-touch fitting uses electroless nickel plated brass components as standard specification. Its maximum operating temperature is 150° C.  KQB2 fittings can be used with fluid, and in environments having a large temperature change.  Configuration variations have been improved to 17 models.  Applicable tube sizes are Ø3.2 to Ø16 and 1/8" to 1/2".  Series KQB2 is available with M, R, Rc, UNF, NPT or G connection threads.

S coupler series KK employs a unique connection method. A slim body design and large effective area are achieved with a construction that does not use steel balls or valve springs and therefore does not restrict the flow path. Together with a reduction of the body size, pressing parts and resin parts are used to achieve an overall weight reduction.

Pneumatic sensors with buttons and a display to set and read values from an operator's position.

The LEY rod type electric actuator has a familiar rod cylinder form suitable for push, pull, lift and press applications. The 24VDC motor can be reverse mounted for compact length, or inline mounted for compact height. The LEY series offers a wide variety of actuator mounting options as well, including numerous direct and bracket styles.

The AC-D series of modular F.R.L. brings a modern appearance to 91pornÊÓƵ's line of air preparation equipment while maintaining the high performance of our other series.  The maximum set pressure of the AC-D is 125 psi allowing use in a broad range of applications.  Most of the features of the AC-A and -B have been incorporated into the AC-D - transparent bowl guards for full visibility; embedded gauges and pressure switches; reduced maintenance space and simplified element change on AF-D series filters.  The AC-D is currently available in three body sizes with more to come in the near future.

Series S070 is a super compact direct acting 2/3 port solenoid valve that meets the miniaturization needs of analyzers, medical equipment and semiconductor manufacturing equipment. S070 is extremely lightweight (5g for valve single unit type) and operation noise is 38dB(A) or less. It is easy to increase or decrease the number of stations (stacking base). Valve width is 7mm.

The VDW series is a compact direct operated 2/3 port solenoid valve for air, water and medium vacuum. Available body materials include resin, brass or stainless steel. Resin body is offered with one touch fitting to reduce installation time. It is suitable for applications that requires a small footprint and flow of less than Cv of 0.30.

Solenoid valve is designed for special applications like air, gas, steam, water and oil.  The VXK includes a Y type strainer installed inside the body to remove foreign materials mixed in fluids  before they enter the actuating part of the valve (armature), as well as preventing the flow of foreign materials to downstream equipment.  The VXH is high pressure capable of a maximum operating pressure is 2.0  MPa.

Membrane air dryer series IDG is available in a single unit or combination unit style. IDG/M models combine a mist separator and micro mist separator with a single unit. IDG/V models combine a regulator with the IDG/M model. Options available include one-touch fitting exhaust of purge air. If purged air is not exhausted around membrane air dryer, air is exhausted with tubing away from its dryer.

SFDA series is a stainless steel inline filter with hollow fiber element to remove bacteria from compressed air that passes through it.  SFDA series uses materials compliant with FDA and Japan's food sanitation law for its wetted path.  SFDA filter is suitable for direct air blowing to food products.

Series ZF are air suction filters that prevent trouble in vacuum equipment caused by contaminants in the air. They are light weight and compact. ZF filter elements are easily replaced without tools.

Miniature air regulator series ARJ is part of 91pornÊÓƵ's pressure control equipment line. The ARJ series is available with or without one-touch fittings depending on the model type. All models come standard as direct operated relieving style. Two mounting thread options are available on the ARJ210 & ARJ310 series. ARJ1020F comes standard with M5 threads. Options include bracket, pressure gauge, and manifold base (depending on model).

KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The use of a special profile seal allows the KQ2 to be used for a wide range of pressures from a low vacuum up to a pressure of 1MPa.  The KQ2 release collar releases both the chuck and collet to provide a low disconnection force for easy removal of the tubing.

The AC-D series of modular F.R.L. brings a modern appearance to 91pornÊÓƵ's line of air preparation equipment while maintaining the high performance of our other series.  The maximum set pressure of the AC-D is 125 psi allowing use in a broad range of applications.  Most of the features of the AC-A and -B have been incorporated into the AC-D - transparent bowl guards for full visibility; embedded gauges and pressure switches; reduced maintenance space and simplified element change on AF-D series filters.  The AC-D is currently available in three body sizes with more to come in the near future.

91pornÊÓƵ offers a variety of pressure gauges including general purpose, oil-free/external parts copper-free with limit indicator, clean series and a pressure gauge with a pressure switch.  Pressure ranges vary from 0 to 1.5MPa, depending on the selected gauge.  Panel mounting is possible.

The AD402-A is the improved version of 91pornÊÓƵ's proven AD402 auto drain design.  These enhancements include an improved resistance to foreign matter, increased discharge rate and reduced weight.

Series AMJ is effective for removing water droplets from the air sucked into vacuum pumps and ejectors. Over 90% of droplets can be removed through the use of a special water droplet removing element. The provision of a drain cock makes it possible to discharge the drain manually after breaking the vacuum. Even when the element is saturated with water, there is almost no drop in pressure (increase in resistance).

Heatless air dryer ID series is best when dry air with a low dew point is needed. Supply dry air with a low dew point below 30°C. Air dryer series ID is compact and light weight without heater and electric control board. Possible to check the outlet dew point with the indicator. (Self-regenerative style allows for easy maintenance.)

IDFB series refrigerated air dryers are cUL listed for use in North America.  These 60 Hz models have rated flows up to 459 SCFM (780 m³/hr [ANR]).

91pornÊÓƵ high purity Hyperflare™ Fitting series LQ* responds to the latest demands in process control. From parts cleaning to assembly and packaging, all processes are controlled for cleanliness, and the use of new PFA virtually eliminates particle generation and TOC (total organic carbon) allowing confident use for the most demanding applications. If chemistries or flow requirements are changed during process, our face seal design allows for quick change of tubing, and/or tube diameters, using the same fitting body.

Series TL high purity fluoropolymer tubing is available as standard in metric sizes of 10m or 20m rolls. The TL series has outstanding corrosion resistance, compatible with chemicals such as acids, bases and ultrapure water.

VXS 2 port solenoid valve for steam is compact and lightweight, designed to operate with no need for differential pressure. The VXS is considerably quieter than similar valves due to its special construction and full wave rectifier type solenoid. A piston main valve and special FKM material for both the valve and seal help reduce internal leakage to 1.0 cm³/min or less, and improve life cycle and valve reliability. The VXS valve series is RoHS compliant and meets IP65 enclosure guidelines.

VXB series is an air operated valve for steam that utilizes angle seat structure to minimize pressure loss.  It is available with stainless steel 316L or bronze body material, and port size ranges from 3/8" to 3/4".  FKM seals are utilized to reduce leakage and provide long service life of over 3 million cycles (steam) or 5 million cycles (air)

Series AK/AKH/AKB check valves offer various configurations to provide design solutions based on operating conditions. The series is compact and lightweight with low cracking pressure. The AKH with one-touch fitting, straight type, is easily installed in pipelines, while the male connector type can be mounted directly onto equipment. The bushing type AKB can be used in applications with splashing coolant and spatter, etc.

AP Tech, also known as Advanced Pressure Technology, manufactures a wide assortment of gas delivery components. Founded in 1987, AP Tech has grown to be a global leader in pressure regulators and valves used for semiconductor wafer fabrication and other clean industries such as solar and flat panel displays. AP Tech also services many other industries delivering specialty and bulk gases for a wide variety of applications.

This next generation ISE70 pressure sensor provides continuous quantitative values, as well as switched digital outputs when pressure set points are met.  This sensor is also IO-Link compatible.  Sensor information, such as identity, functional state, cable connection, and current or switch values can be set or monitored remotely though an IO-Link master, and connected to a fieldbus network.  The ISE70 is designed for abusive environments that may also include splashed coolant, lubricants or grime.  Electronics are packaged in a metal housing, while the piping connection is a stout lug with female threads, which together protect the sensor against accidental collisions with other objects in the area.  A smooth display face with membrane type buttons avoids contamination from grit and sticky residue that could clog or jam raised rubber buttons.  The display is angled and can rotate 336 degrees, to permit easy reading when indirectly mounted.  The main screen shows instantaneous values in red or green, while the sub screen setting appear in orange.  Switch indicators will also light when set points are reached.

LSP series is a compact solenoid diaphragm pump for liquid. It dispenses fixed amount of liquid from 5uL to 200uL each time it is energized. Its diaphragm movement is supported by buffer, extending life of the product and improve its repeatability (+/1%) by restricting deformation of the diaphragm. LSP is used in applications such as medical analyzer, ink jet printing or semiconductor/solar cell production.

The PB series is a compact, single acting diaphragm pump which is suitable for transfer and recovery of a wide variety of fluids. The PB series is available with a built-in solenoid valve or in an air operated style. Space is saved due to the centralization of piping and wiring areas on the top and bottom surfaces.

JSY series is a 5-port directional control valve targeted for the robotic arms and end of arm tools.  It has compact and lightweight design while improving its flow characteristics.  JSY series is available as plug-in and non plug-in types.  There are 3 valve body sizes available for JSY series, JSY1000 (6.4mm), JSY3000 (10mm) and JSY5000 (15mm).  JSY1000 is the world's smallest width 5 port valve with body width of 6.4mm.  JSY plug-in type is compatible with fieldbus and ethernet communication module such as EX600 and EX260.

The VV061 series is a direct operated 3-way solenoid valve designed for 4 and 8 station units with integrated compact manifold, valve, circuit board, base and fittings forming a single compact unit.  VV061 series model has an optional power saving circuit that can be used for long-term continuous duty.  This unit is available with one-touch or barb fitting and an optional connector cable with lengths of 300, 600, or 1000mm.

Series PF3W7-Z digital flow sensor constantly monitors water or coolant flow.  All "Z" models have redesigned piping adapters, imparting a 13-53% weight reduction depending on flow range.  PF3W7 features an integrated 3-color, 2-screen display.  Options include a manual flow adjustment valve and temperature sensor.  The instantaneous flow value can be displayed on the main screen, while temperature can be monitored on the subscreen.  Change color from green to red or vice versa to indicate a flow set point has been reached. The white subscreen can also show the set point, accumulated or peak/bottom value, or a line name instead of the temperature.  The display rotates in both clockwise and counter-clockwise directions, offering improved readability during operation.  Switch and analog voltage or current signal outputs can be read over the M8 cable.  PF3W7-Z is IP65 rated, and is both RoHS and CE compliant.

Series PA is a double acting, compact, large capacity diaphragm pump suitable for transfer and recovery of a wide variety of fluids. The PA series is available in 3 types; automatically operated, air operated or automatically operated with a built-in pulsation attenuator.

The IZG10 Ionizer Gun combines the functions of a triggered, compressed air blow gun and a high frequency AC ionizer.  This device allows a user to easily clean dust-contaminated workpieces, or separate clinging films or sheets of paper or carboard during manual operations.  Once the target materials are cleaned, additional operations can be performed such as assembly, printing or labeling, surface treatment, or packaging.  Ergonomic features such as a low 200g weight, easy to hold grip, and trigger settings improve comfort and reduce user fatigue.  Energy savings result from selecting a pulse blowing mode, an OFF timer, or setting on the flow adjustment valve.  High visibility LEDs indicate power, ion generation, maintenance requirement, or function errors.  A removable nozzle allows emitter cleaning and eventual replacement at its end of life.  An optional 30psi OSHA-compliant bypass nozzle is also available.  Finally, a bright LED at the front illuminates the target area for detailed work.  Includes 3m power supply cable.

The AC servo version of the LEFS slider features an AC servo motor instead of a DC version. The AC servo motor enables higher speed and acceleration, as well as improved vertical load capability in the size 40 model. The drivers are pulse input type, with both incremental and absolute encoder options and 17- or 18-bit resolution.

S coupler series KK employs a unique connection method. A slim body design and large effective area are achieved with a construction that does not use steel balls or valve springs and therefore does not restrict the flow path. Together with a reduction of the body size, pressing parts and resin parts are used to achieve an overall weight reduction.