91pornÊÓƵ

The VX2 series is 2 port direct solenoid valve for general purpose air, medium vacuum and water. Available body materials include resin, aluminum, brass or stainless steel with port size up to 1/2 inch. Resin body is offered with one touch fitting to reduce installation time. It is also available as a manifold to reduce piping.

Dust collector reverse pulse jet valves are the filter cleaning components for baghouses (dust collection systems) for preventing dust explosions by removing particulates from the air.  The JSXFA dust collector valve is engineered with a robust elastomer diaphragm that requires no spring to shift, enhancing its service life to 10 million plus cycles while producing faster response times and energy savings.

91pornÊÓƵ has improved product performance and reliability with the redesigned SY series valve.  The SY3000 and SY5000 have the same valve width as their predecessors, but the flow has been increased by up to 80%, allowing the valve size to be reduced. A built-in strainer in the pilot valve prevents trouble caused by foreign matter. By using H-NBR seal material for the main valve and seals, Ozone resistance has been improved.   Side, top and bottom port/pipe directions are available to allow flexible installation.  The SY is available in body ported or base mounted styles, and can be used individually or manifold mounted.

Pin clamp cylinder series C(L)KQ series was designed with 4 body types for a broad range of installation conditions.  There are 55 types of guide pins available and an optional locking mechanism.  C(L)KQ series has positioning and clamping at one time.  Precision adjustment of clamping height is possible by choosing the with-shim type.  Adjustment range: 0.5 to 3mm.

Clamp cylinder series CK1-Z is available in two styles of clevis widths (16.5mm, 19.5mm).  It is a non-lube, compact, lightweight cylinder with a built-in speed controller.  The CK1-Z is available in 3 bore sizes with stroke lengths up to 150mm.  Options include easy speed adjustments, rod attachments and auto switch capabilities.

Power clamp series CKZ3N conforms to the NAAMS standard.  The improved design reduced weight by up to 39% with aluminum body.  The rounded cover design and release button with minimal protrusion, reduce weld spatter accumulation.  The arm opening angle range from 15° to 135° and can be easily changed by replacing the stopper body.  Available in 50 and 63 bore sizes.

Power clamp cylinder series CKZ3T-X2734, was designed with metal switch cassette cover with reconfiguration for simple switch adjustment.  Similar to the CKZ3T, the arm opening angle can be easily changed by replacing the stopper bolt.

Shot pin cylinder series CKZP is designed for both high precision and positioning repeatability.  Also known as a locating pin cylinder, the configurations for the CKZP include bore sizes equivalent to 57mm and 71mm with strokes of either 25mm or 50mm.  The proximity switch sensor and port thread type can also be selected.  Widely used in automotive applications, the mounting is based on NAAMS standard (71mm bore)

91pornÊÓƵ's MK-Z is a rotary clamp cylilnder that has a high allowable moment of inertia.  The typical application for the MK-Z is to hold parts during a welding application.  A short overall length means that the MK-Z series is versatile in mounting.  Auto switches can be mounted on any of the 4 surfaces with no projection of the switch.

The WRF100 with its high clamping force makes it suitable for a broad range of applications.  Standardized T-type and S-type arms allows the selection to meet certain specifications or applications.  Also, has an optional spatter protective cover with easy assembly even after the cylinder is installed.

The weld spatter resistant CA2-XC88/XC89/XC91 series is an option of the standard, light weight tie rod air cylinder.  Fine end of stroke cushioning adjustment is now possible due to the increase in the air cushion adjustment range.  The CA2 can be ordered with rod end or rear pivot brackets.  A variety of auto switches are available for mounting, including compact switches and magnetic field resistant switches.  The CA2 is available in 40, 50, 63, 80 and 100 bores sizes, and is RoHS compliant.

The CQ2 weld spatter resistant compact cylinder is an option of the world's best selling pneumatic cylinder and can be supported globally. The CQ2-XC88/XC89/XC91 is available in 6 bore sizes from 32mm to 100mm. It comes standard with male or female piston rod threads. For mounting flexibility, it is possible to mount auto switches on any of the 4 surfaces.

The weld spatter resistant MB-XC88/XC89/XC91 series is a light weight, medium duty tie rod cylinder. Available bore sizes range from 32mm to 100mm. The standard air cushion utilizes a floating cushion seal to eliminate piston rod bouncing.

The MGP-XC88/XC89/XC91 is designed for high side load applications found in material handling, lifting and stopping in welding environments. The cylinder utilizes an ultra-compact design by incorporating the cylinder body as part of the guide body.

The ISE70G pressure sensors provide continuous quantitative values, as well as switched digital outputs when pressure set points are met.  Compatible fluids include any non-corrosive liquid or gas.  6 pressure ranges are offered up to 50 MPa.  This sensor is also IO-Link compatible.  Sensor information, such as identity, functional state, cable connection, and current or switch values can be set or monitored remotely through an IO-Link master, and connected to a fieldbus network.  The ISE70G series is designed for abusive environments that may also include splashed coolant, lubricants, or grime.  Electronics are packaged in a metal housing, while the piping connection is a stout lug with female threads, which together protect the sensor against accidental collisions with other objects in the area.  A smooth display face with membrane type buttons avoids contamination from grit and sticky residue that could clog or jam raised rubber buttons.  The display is angled and can rotate 336 degrees, to permit easy reading when indirectly mounted.  The main screen shows instantaneous values in red or green, while the sub screen settings appear in orange.  Switch indicators will also light when set points are reached.

Lightweight, compact, and precision control make these speed controls the right choice for many heavy-duty applications. These speed controls are offered with in-line and elbow construction to give the widest choice to your unique application. Locking nuts are included as standard as well as simplified mounting. Thread sizes range from M3 to 2 and are available in both inch (NPT) and metric R/Rc(PT)

All metal exterior speed controller with one-touch fitting. The all metal exterior is excellent for harsh environments like welding. Optional spatter cover for the one-touch connection is available.

Compact and lightweight, the KQB2 one-touch fitting uses electroless nickel plated brass components as standard specification. Its maximum operating temperature is 150°. KQB2 fittings can be used with fluid, and in environments having a large temperature change.  Configuration variations have been improved to 17 models.  Applicable tube sizes are Ø3.2 to Ø16 and 1/8" to 1/2".  Series KQB2 is available with M, R, Rc, UNF, NPT or G connection threads.

Series TRTU flame resistance three-layer tubing is suitable for air and water piping in environments where sparks from arc welders, etc., may be a problem.  The three-layer design uses a flame resistant polyolefin (equivalent to UL-94 Standard V-0) for the outer area.  The TRTU series is available in a variety of colors and sizes and is RoHS compliant.

The EX600 serial interface offers a full suite of diagnostics and programmable parameters to meet the most stringent requirements. The EX600 offers excellent flexibility including digital input, digital output and analog input unit options. With the use of D-sub output blocks, a maximum of 9 remote D-sub manifolds can be attached to one EX600 communication module. This serial interface is compatible with series SV1000/2000/3000, VQC1000/2000/4000, S0700 and the new SY series valves. Available protocols include  Ethernet/IP™, PROFINET. 

With coalescing filtration, 91pornÊÓƵ’s upstream main line filters remove contaminants as fine as 0.1 microns. Some filters can remove aerosol state oil mist, up to 0.01 microns for precise, clean, dry air for the most efficient use in pneumatic systems.

HRS, HRS-R, HRSE compact recirculating chillers are designed to meet the widest range of single-point applications in both industrial and technology settings. The package design is robust enough for the factory, yet ergonomic and compact for lab installations. Coolant can be either heated or cooled within the set temperature range. Choose from eight cooling capacities, air or water cooled refrigerant, and global power supply options.

HRSH recirculating chillers offer a cooling capacity range of 10 to 28 kW. Coolant and refrigeration circuits are included in a compact and lightweight package. Extracted heat can be air or water cooled. An inverter provides demand-based rotation control for the compressor, pump and fan (air cooled model), offering substantial energy savings.  Electric options ensure global power supply compatibility.

Large Capacity chillers offer a cooling capacity range of 10 to 28 kW. Coolant and refrigeration circuits are included in a compact and lightweight package. Extracted heat can be air or water cooled. An inverter provides demand-based rotation control for the compressor, pump and fan (air cooled model), offering substantial energy savings.  Electric options ensure global power supply compatibility.

The Rack Mount Chillers are a temperature control device mountable in a 19-inch rack. Rack mounting recovers desktop or floor space, permitting stacking of related devices and mobility, depending on the rack style. Recirculating fluid removes heat from the process source. The heat is then removed from the fluid by an air or water-cooled refrigeration circuit. Coolant temperature stability is ±0.1°C within a set temperature range of 10 to 35°C.