Select values from the drop down lists or make appropriate selections to configure the part number.
Nozzle Diameter
-- Pick an Option --
ø0.5
ø0.7
ø1.0
ø1.3
ø1.5
Body Style
-- Pick an Option --
1 (Single Unit w/Valve + Standard Silencer)
1S (Single Unit w/Valve + High Noise Reduction Silencer)
2 (Single Unit w/Standard Silencer, w/o Valve)
2S (Single Unit w/High Noise Rduction Silencer w/o Valve)
3 (Manifold w/Common SUP Valve)
4 (Manifold w/o Common SUP Valve)
5 (Manifold w/Individual SUP Valve)
6 (Manifold w/o Individual SUP Valve)
Vacuum Port Location
-- Pick an Option --
Side/Bottom Entry
A (Side Entry)
Standard Supply Pressure
-- Pick an Option --
M (0.35 MPa)
S (0.45 MPa)
H (0.5 MPa)
Thread Type
-- Pick an Option --
Rc
T (NPTF)
F (G)
Supply/Release Valve
-- Pick an Option --
Without Valve
A (Supply Valve)
B (Supply Valve+Release Valve)
J (Supply Valve)
K (Supply Valve+Release Valve)
P5 (Air valve, Supply Valve)
Q5 (Air Valve, Supply/Release Valve)
Solenoid Valve Rated Voltage
-- Pick an Option --
W/out Valve/Air Operated
1 (100VAC 50/60Hz)
3 (110VAC 50/60Hz)
5 (24VDC)
6 (12VDC)
R (3VDC)
S (5VDC)
V (6VDC)
Electrical Entry
-- Pick an Option --
W/out Valve/Air Operated
G (Grommet Type w/0.3m Lead Wire)
H (Grommet Type w/0.6m Lead Wire)
L (L Plug Connector w/0.3m Lead Wire)
LN (L Plug Connector w/o Lead Wire)
LO (L Plug w/o Connector)
Light/Surge Voltage Suppressor
-- Pick an Option --
None
S (w/Surge Voltage Suppressor)
Z (w/Light/Surge Voltage Suppressor)
Manual Override
-- Pick an Option --
Non-locking Push Style
B (Locking Slotted Type)
Vacuum Switch Model
-- Pick an Option --
Without switch
E14 (1 Output w/o Analog Output, 3 Rotation)
E15 (1 Output w/o Analog Output, 200° Setting)
E16 (2 Outputs w/o Analog Output, 3 Rotation Setting)
E17 (2 Outputs w/o Analog Output, 200° Setting)
E18 (1 Output, Analog Output, 3 Rotation Setting)
E19 (1 Output, Analog Output, 200° Setting)
E55 (1 Output w/o Analog Output, 200° Setting, PNP Output)
M15 (1 Output w/o Analog Output, Diaphragm 18 Rotation Setting, Solidstate 10 to 26 VDC)
M21 (1 Output w/o Analog Output, Diaphragm 18 Rotation Setting, Reed 100 VAC)
Vacuum Switch Electrical Entry
-- Pick an Option --
Grommet Type, Lead Wire (ZSE1: 0.6m, ZSM1: 0.5m)
C (Connector Lead Wire Length 0.6m)
CL (Connector Lead Wire Length 3.0m)
CN (Connector w/o Lead Wire)
L (Grommet Lead Wire 3m: ZSE1, ZSM1)
Release Flow Rate Adjusting Needle
-- Pick an Option --
Without Lock Nut
L (With Lock Nut)
Made to Order
-- Pick an Option --
None
X107 (Double Check Valve)
X111 (Individual Exhaust Spacer)
X126 (W/Release Valve)
X135 (W/out Release Valve)
CE Compliant
-- Pick an Option --
None
Q (CE compliant)
Options in: Gray are not compatible with other selected option value.Red conflict with another selected option value.Amber are not recommended.
