Pressure Sensor
91pornÊÓƵ offers a range of pressure monitoring devices to meet the diverse application requirements of our customer base.
25A-ISE20A, Digital Pressure Sensor, 3 Screen 2 Output with Analog, Secondary Battery
The 25A- series variations are compatible with secondary battery manufacturing for electronics, automotive, and other vehicle types. 25A-ISE20A is a digital pressure sensor with an informative, easy to read 3-screen, 3-color display. The main screen shows the instantaneous reading in red or green, while two sub-screens can display the setting label and its numeric value in orange. Compared to the ISE20, ISE20A adds a 2nd switch output, as well as an analog voltage or current output. The switch output responds within 1.5ms once the set pressure value is reached. Response time can be adjusted to reduce chattering. Secondary battery capability is achieved by providing a piping port in stainless steel rather than brass. Bracket mounting inserts found on the standard ISE20A are omitted as well. 25A-ISE20A is UL/CSA, CE and RoHS compliant with an IP40 enclosure rating.
- Suitable for the secondary battery manufacturing environment
- 3 setting modes: 3-step, simple, function selection
- 5 pressure units: MPa, kPa, kgf/cm2, bar, psi
- 2 switch output (NPN or PNP), plus 1 analog output (V or MA)
- Port size: M5 female
- Panel mounting adapter available
25A-ISE20C(H), Digital Pressure Sensor, 3 Screen 2 Output with Analog, Secondary Battery
The 25A- series variations are compatible with secondary battery manufacturing for electronics, automotive, and other vehicle types. 25A-ISE20C is a digital pressure sensor offering compatibility with both compressed air and non-corrosive liquids. Compared to the 25A-ISE20, the 25A-ISE20C(H) adds a 2nd switch output, as well as analog voltage or current output. The 25A-ISE20CH offers a 2 MPa pressure range. The 3-screen, 3-color display shows the instantaneous reading in red or green, and the setting label and its numerical value in orange. The switch output responds within 1.5ms once the set pressure value is reached. Secondary battery capability is achieved by providing removing the bracket munting inserts found on the ISE20C(H). 25A-ISE20C(H) is UL/CSA, CE and RoHS compliant, with an IP65 enclosure rating.
- Pressure sensing for air and liquid non-corrosive to 630 and 304 SST
- Suitable for the secondary battery manufacturing environment
- 3 setting modes: 3-step, simple, function selection
- 5 pressure units: MPa, kPa, kgf/cm2, bar, psi
- 2 switch outputs (NPN or PNP) plus 1 analog output (V or mA)
- Port sizes: 1/4 Rc with M5 female
- Panel mounting adapter available
.jpg)
25A-ZSE20(F), Digital Vacuum Sensor, 3 Screen 1 Output, Secondary Battery
The 25A- series variations are compatible with secondary battery manufacturing for electronics, automotive, and other vehicle types. 25A-ZSE20(F) is a digital vacuum sensor with an informative, easy to read 3 screen, 3 color display. The main screen shows the instantaneous reading in red or green, while two sub-screens can display the setting label and its numeric value in orange. 25A-ZSE20(F) saves energy by consuming only 25mA of current. The switch output responds within 1.5ms once the set pressure value is reached. Both vacuum and compound pressure ranges are offered. Secondary battery capability is achieved by providing a piping port in stainless steel rather than brass. Bracket mounting inserts found on the standard ZSE20 are omitted as well. 25A-ZSE20(F) is UL/CSA, CE and RoHS compliant, with an IP40 enclosure rating.
- Suitable for the secondary battery manufacturing environment
- Lowest energy consumption of any ZSE, at 25mA
- 3 setting modes: 3-step, simple, function selection
- 7 displayable units: MPa, kPa, kgf/cm2, bar, psi, inHg, mmHg
- 1 switch output (NPN or PNP)
- Port size: M5 female
- Panel mounting adapter available
25A-ZSE20C(F), Digital Vacuum Sensor, 3 Screen 2 Output with Analog, Secondary Battery
The 25A- series variations are compatible with secondary battery manufacturing for electronics, automotive, and other vehicle types. 25A-ZSE20C(F) is a digital vacuum sensor offering compatibility with both compressed air and non-corrosive liquids. Compared to the 25A-ZSE20, 25A-ZSE20C(F) adds a 2nd switch output, as well as analog voltage or current output. The 3-screen, 3-color display shows the instantaneous reading in red or green, and the setting label and its numerical value in orange. The switch output responds within 1.5ms once the set pressure value is reached. Both vacuum and compound pressure ranges are offered. Secondary battery capability is achieved by providing removing the bracket munting inserts found on the standard ZSE20C. 25a-ZSE20C(F) is UL/CSA, CE and RoHS compliant, with an IP65 rating.
- Vacuum sensing for air and liquid non-corrosive to 630 and 304 SST
- Suitable for the secondary battery manufacturing environment
- 3 setting modes: 3-step, simple, function selection
- 7 displayable units: MPa, kPa, kgf/cm2, bar, psi, inHg, mmHg
- 2 switch outputs (NPN or PNP) plus 1 analog output (V or mA)
25A-ZSE20B(F), Digital Vacuum Sensor, 3 Screen 2 Output with Analog, Secondary Battery
The 25A- series variations are compatible with secondary battery manufacturing for electronics, automotive, and other vehicle types. 25A-ZSE20B(F) is a digital pressure sensor with an infomative, easy to read 3 screen, 3 color display. The main screen shows the instantaneous reading in red or green, while two sub-screens can display the setting label and its numeric value in orange. Compared to the 25A-ZSE20(F), 25A-ZSE20B(F) adds a 2nd switch output, as well as an analog voltage or current output. The switch output responds within 1.5ms once the set pressure value is reached. Both vacuum and compound pressure ranges are offered. Secondary battery capability is achieved by providing a piping port in stainless steel rather than brass. Bracket mounting inserts found on the standard ZSE20B(F) are omitted as well. 25A-ZSE20B(F) is UL/CSA, CE and RoHS compliant, with an IP65 enclosure rating.
- Suitable for the secondary battery manufacturing environment
- 3 setting modes: 3-step, simple, function selection
- 7 displayable units: MPa, Kpa, kgf/cm2, bar, psi, inHg, mmHg
- 2 switch outputs (NPN or PNP) plus 1 analog output (V or mA)
- Port size: M5 female
- Panel mounting adapter available
25A-ISE20B, Digital Pressure Sensor, 3 Screen 2 Output with Analog, Secondary Battery
The 25A- series variations are compatible with secondary battery manufacturing for electronics, automotive, and other vehicle types. 25A-ISE20B is a digital pressure sensor with an informative, easy to read 3 screen, 3 color display. The main screen shows the instantaneous reading in red or green, while two sub-screens can display the setting lable and its numeric value in orange. Compared to the 25A-ISE20, 25A-ISE20B adds a 2nd switch output, as well as an analog voltage or current output. The switch output responds within 1.5ms once the set pressure value is reached. Response time can be adjusted to reduce chattering. Secondary battery capability is achieved by providing a piping port in stainless steel rather than brass. Bracket mounting inserts found on the standard ISE20B are omitted as well. 25A-ISE20B is UL/CSA, CE and RoHS compliant, with an IP65 enclosure rating.
- Suitable for the secondary battery manufacturing environment
- 3 setting modes: 3-step, simple, function selection
- 5 pressure units: MPa, kPa, kgf/cm2, bar, psi
- 2 switch output (NPN or PNP), plus 1 analog output (V or MA)
- Port size: M5 female
- Panel mounting adapter available
25A-ISE20, Digital Pressure Sensor, 3 Screen 1 Output, Secondary Battery
The 25A- series variations are compatible with secondary battery manufacturing for electronics, automotive, and other vehicle types. 25A-ISE20 is a digital pressure sensor with an infomative, easy to read 3-screen, 3-color display. The main screen shows the instantaneous reading in red or green, while two sub-screens can display the setting label and its numeric value in orange. 25A-ISE20 saves energy by consuming only 25mA of current. The switch output responds within 1.5ms once the set pressure value is reached. Secondary battery capability is achieved by providing a piping port in stainless steel rather than brass. Bracket mounting inserts found on the standard ISE20 are omitted as well. 25A-ISE20 is UL/CSA, CE and RoHS compliant with an IP40 enclosure rating.
- Suitable for the secondary battery manufacturing environment
- Lowest energy consumption of any ISE, at 25mA
- 3 setting modes: 3-step, simple, function selection
- 5 pressure units: MPa, kPa, kgf/cm2, bar, psi
- 1 switch output (NPN or PNP)
- Port size: M5 female
- Panel mounting adapter available
.jpg)
25A-ZSE20A(F), Digital Vacuum Sensor, 3 Screen 2 Output with Analog, Secondary Battery
The 25A- series variations are compatible with secondary battery manufacturing for electronics, automotive, and other vehicle types. 25A-ZSE20A(F) is a digital vacuum sensor with an informative, easy to read 3 screen, 3 color display. The main screen shows the instantaneous reading in red or green, while two sub-screens can display the setting label and its numeric value in orange. Compared to the 25A-ZSE20(F), the 25A-ZSE20A(F) adds a 2nd switch output, plus an analog voltage or current output. The switch output responds within 1.5ms once the set pressure value is reached. Both vacuum and compound pressure ranges are offered. Secondary battery capability is achieved by providing a piping port in stainless steel rather than brass. Bracket mounting inserts found on the standard ZSE20A are omitted as well. 25A-ZSE20A(F) is UL/CSA, CE and RoHS compliant, with an IP40 enclosure rating.
- Suitable for the secondary battery manufacturing environment
- 3 setting modes: 3-step, simple, function selection
- 7 displayable units: MPa, kPa, kgf/cm2, bar, psi, inHg, mmHg
- 2 switch output (NPN or PNP), plus 1 analog output (V or mA)
- Port size: M5 female
- Panel mounting adapter available