24VDC Controllers, Multi Axis
Save space and reduce wiring by using a 3- or 4-axis controller for LE actuators with 24VDC step motors. The JXC92 can control up to 3 axes and is compatible with EtherNet/IP™ fieldbus. Complex movements such as 2-axis arc or circular interpolation, and 3-axis linear interpolation are possible.
JXC73/83/93, Step Motor Controller, 4 Axis
The JXC73, 83 and 93 are 4-axis controllers for LE's 24VDC step motor driven electric actuators. Four electric actuators can be controlled within one package, simplifying wiring and economizing space. Further, the coordination of complex movements is possible. These movements include 2-axis arc or circular interpolation, 3-axis linear interpolation, and 4-axis speed matching. The speed matching feature corrects for speed differences between axes that could result from external forces or other factors. Synchronous positioning with feedback between axes is not available. JXC73 and JXC83 are NPN and PNP parallel I/O types using two 40-pin cables. JXC93 uses the EtherNet/IP™ fieldbus protocol to communicate with the PLC. One line of step data can be called for up to 4 axes of force and movement instructions. Typical applications include pick and place gantry movement, multi-axis lifting while maintaining orientation and stability, and non-linear path tracing for graphics production or dispensing.
- Up to 2048 lines of step data, with up to 4 axes of control per line
- Positioning and pushing operations
- Absolute and relative movements
- I/O: NPN/PNP parallel, or EtherNet/IP™
- Screw bracket or DIN rail mounting
- 4 LED status indicators
- Software configuration via laptop USB (software available separately)
JXC92, 3-Axis Step Motor Controller, with ·¡³Ù³ó±ð°ù±·±ð³Ù/±õ±Êâ„¢
The JXC92 is a 3-axis controller for LE's 24VDC step motors, compatible with EtherNet/IP™Â fieldbus. Three electric actuators can be controlled within one package, simplifying wiring and economizing space. Further, the coordination of complex movements has been added. These movements include 2-axis arc or circular interpolation, and 3-axis linear interpolation, along with speed tuning control. A call to one line of step data can include force and movement instructions for up to three axes. Typical applications include pick and place sorting or filling, lifting, and non-linear path tracing for graphics production or dispensing.
- Up to 2048 lines of step data, with up to 3 axes of control per line
- Positioning and pushing operations
- Absolute and relative movements
- Screw bracket or DIN rail mounting
- 4 LED status indicators
- 3 rotary switches for IP address settings
- Software configuration via laptop USB (softward sold separately)