KN
With the release of the KN series nozzles and gauge heads 30~90% of air consumption required for the current nozzle operation can be saved with the appropriate selection of the new nozzle and sizing. Many variations of nozzle are available with tube materials including nylon, soft nylon, soft copper pipe and OST tubing. Sizes range from 4mm-20mm.
KN, Male Thread Air Nozzle
The basic male thread KN series air nozzle is available in a range orifice sizes for installation in Rc 1/8 through 1 ports. These are available in both fixed and pivoting nozzle designs. Â
- Nozzle with male thread
- Pivoting nozzle with male thread
- Max operating pressure: 1.0MPa
- Variety of tube materials available
KN, Air Nozzle for One-touch Fitting
KN and KNA(G) series air nozzles for One-touch fittings are easily installed in push-to-connect fittings. The KNA(G) series is OSHA compliant for deadhead pressure for installation in locations where operator contact is a possibility.
- Nozzle for One-touch fittings
- Tube materials: KN-Q*A, KNA: PBT; KN-Q, KNAG: SUS
- Multiple nozzle diameters: KN-Q(*A) only
- Compatible fitting series: KN-Q*A, KNA: KQ2, KC, KB, KP, KX, KS, KQB2, KQG2; KN-Q, KNAG: KQB2, KQG2
- Meets OSHA 1910.242(B) standard for deadhead pressure [KNA(G)] only
KNH, High Efficiency Air Nozzle
The KNH series high efficiency air nozzle is able to provide improved thrust while drawing in ambient air for improved impact. Additionally, the OSHA compliant design restricts dead-head pressure to less than 30 psi for safety.
- High-efficiency nozzle
- With male thread
- Connection size: 02 (R1/4)
- Nozzle size: 1.0, 1.5, 2.0
KNS, Low Noise Air Nozzle
KNS series air nozzles are designed for reduced noise operation while still providing effective impact.
- Low noise nozzle
- Self align fittings
- Male thread type available
- Connection size: R1/8, R1/8, ø8, ø10
- Nozzle size: 0.75, 0.9, 1, 1.1
KNL, Copper Tube Long Air Nozzle
KNL series air nozzles with copper extension tubes enable the user to reach into a part or work cell to dislodge debris.
- Copper extension nozzle
- 0.3m & 0.6m available
- Can be connected to OST steel piping
and flexible copper piping - Variety of tube materials available
KN, Insert Fitting Type Air Nozzle
The KN series air nozzle with self align fittings is available in a range orifice sizes for installation on 4mm to 20mm tubing. These are available in both fixed and pivoting nozzle designs.
- Nozzle with self align fitting
- Pivoting nozzle with self align fitting
- Possible to connect a nozzle
without the need to machine threads - Variety of tube materials available
KNP, Sensing Heads
KNP series sensing heads can be used with manometers to measure the impact pressure on a workpiece from a nozzle.
- Measuring part, gauge head
- Nozzle size: 2.5, 0.7mm
- Max operating pressure: 0.8MPa
- Measurement probe with pivot
tube end configuration
IN-225, Wide Angle Blow Nozzle
The IN-225 series nozzles are designed to create a wide fan spray of coolant or water. They are ideally suited for rinsing applications.
- Fixed or adjustable angle models
- Can be used with flexible copper or OST pipe
- Electroless nickel plated brass construction
- Coolant: water, air